1
/
of
6
Material: PVC heat transfer heat transfer film T-shirt Iron On HTV Printing
Color: As the picture shown
Size: 30cm*100cm,11.8inch*39.3inch/piece
Package: One piece.
Usage:
- Home decoration
- Shoes
- Bags
- Patchwork
- Quilting
- Pillows
- T-shirt
Instructions for use:
Step 1: Weed & Cut:
- All designs must be cut in reverse.
- Cut out the pattern. Make sure the vinyl side is up and the harder plastic side is down.
- Weed out the excess material.
Step 2: Heat and Transfer:
Home Iron:
- Medium setting (150-160 C).
- Medium/firm pressure(about 10 lbs) for 10-15s.
Heat Press:
- Preheat garment for 2-3s.
- Apply design:305℉ / 150C
Medium pressure for 10-15s.
Step 3: Cool Peel
- Peeling the clear pet film after the vinyl turns cold, just in 15-30 seconds later for the vinyl to cool down.
*If any part of the iron on vinyl lifts off, repeat the steps above until you can peel off the clear backing without lifting up the vinyl.
NOTE: The vinyl is divided into three layers, the outermost layer is a protective film, bubbles and slight creases will not affect the use.
Regular price
$16.34 AUD
Regular price
Sale price
$16.34 AUD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
Share
























